Posts

Showing posts from December, 2014

[Xorp] How to use Xorp in RouteFlow

Image
If you use RouteFlow before, you will notice that the routing software it installs is Quagga by default. So, how to change to Xorp in RouteFlow? Here is an example for rftest2 case to do this. I assume the current path is under RouteFlow's directory.

1. Add new configuration files in rftest/config for rfvmA to rfvmD:

rftest/config/rfvmA/rootfs/usr/etc/xorp.conf
    protocols {
        ospf4 {
            router-id: 1.1.1.1
            area 0.0.0.0 {
                interface eth2 {
                    vif eth2 {
                        address 10.0.0.1 {
                        }
                    }
                }
            }
            area 0.0.0.1 {
                interface eth3 {
                    vif eth3 {
                        address 30.0.0.1 {
                        }
                    }
                }
            }
            area 0.0.0.4 {
                interface eth4 {
                    vif eth4 {
                        address 50.0.0.1 {
        …