[Introduction] ar and ranlib

ar and ranlib
ar this program can do the following actions to the archive (static library)
create, modify, and extract.Following is a list of several commonly used options explained:

• d: delete
• Remove files from the archive

• r: replace
• Insert archive files to be replaced

• u: update
• option 'r' is usually to replace all, but the option u only will be inserted over the files in the archive in

• v: verbose
• The implementation, as well as additional information

for example:
   > ar uv mylib.a first.o second.o

These directives is to establish two obj file into a mylib.a, and shows the implementation of the process information

ranlib generates an index to the contents of an archive and stores it in the archive. The index lists each symbol defined by a member of an archive that is a relocatable object file.

You can use nm-s or nm, - print-armap Include to list this index

To run this program is to increase the speed of linking to the library and allows routines in the library can call each other without having to worry about these routines in the archive of the placement order

[Cucumber] An brief introduction

http://cukes.info/
I just saw the "Cucumber" and was amazed by its power of scenario testing with human-readable syntax and sentences. It is so amazing...
If you guys want to do the job for testing, that is a good choice~

For more information in details, please also check it out:
http://andrewvos.com/2011/06/15/writing-better-cucumber-features/
http://grosser.it/2008/12/25/getting-started-with-cucumber-on-ubuntu/
http://jeannotsweblog.blogspot.tw/search?q=cucumber
http://holmwood.id.au/~lindsay/2009/11/09/behaviour-driven-infrastructure-through-cucumber/

How to install Cucumber
sudo apt-get install libxslt1-dev libxml2-dev racc
sudo apt-get install gem
sudo gem install gherkin
sudo gem install cucumber./script/generate cucumber
rake features

[How To] Add ZeroMQ in Trema App

If someone wants to add the mechanism of ZeroMQ to send message from Trema Application, for instance, Routing_Switch, there are several things that need to do and I have tested OK.

Example Trema App: Routing_Switch

1. Install ZeroMQ

• Please follow the instruction from the offical web site: http://www.zeromq.org/intro:get-the-software

2. Modify its Makefile: 

• add the include folder location of ZeroMQ :

• CFLAGS = $(shell $(TREMA)/trema-config --cflags) -I/home/liudanny/SourceCode/zeromq2-1/include -I../topology -g -std=gnu99 -D_GNU_SOURCE -fno-strict-aliasing -Werror -Wall -Wextra -Wformat=2 -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Wfloat-equal -Wpointer-arith

• add library name of zeroMQ and link it:
• LDFLAGS = $(shell $(TREMA)/trema-config --libs) -lzmq -L../topology -ltopology

3. Write your ZeroMQ code in Routing_Switch.

[How to][Trema] Get Flow_Removed message in routing_switch app

I asked an question about how to get Flow_Removed message in routing_switch app. But, soon I realized that I asked a stupid one because the answer is also in OpenFlow Spec v1.0.0.
We should set a "OFPFF_SEND_FLOW_REM" flag into "Flow Mod" message when we want to set a flow. The following list is the discussion message log.

================================================================ 
Hi,


If you want to receive "Flow Removed" message, you have to set
"OFPFF_SEND_FLOW_REM" flag into "Flow Mod" message when you set the flow.


Currently "routing_switch" app does not set this flag, then switches does
not send "Flow Removed" message.

================================================================
Hi,
  I try to get "Flow_Removed" message in routing_switch app, but do not see any one coming in.
The following is what I have done in the app and could someone tell me how to fix or modify it?
Many thanks.


Add it in main():
  set_flow_removed_handler( handle_flow_removed, routing_switch );


Add a method for display:
void handle_flow_removed( uint64_t datapath_id, flow_removed message ) {
  routing_switch *routing_switch = message.user_data;
  info( "[handle_flow_removed] dpid = %#" PRIx64 ", match = %s",
          datapath_id, message.match );
}


Modify routing_switch.conf:
vswitch {
  datapath_id "0xe0"
}
vhost ("host1") {
  ip "192.168.0.1"
  netmask "255.255.0.0"
  mac "00:00:00:01:00:01"
}
vhost ("host2") {
  ip "192.168.0.2"
  netmask "255.255.0.0"
  mac "00:00:00:01:00:02"
}
link "0xe0", "host1"
link "0xe0", "host2"


run {
  path "../apps/topology/topology"
}
run {
  path "../apps/topology/topology_

discovery"
}
run {
  path "../apps/routing_switch/routing_switch"
}


event :port_status => "topology", :packet_in => "filter", :state_notify => "topology", :flow_removed => "routing_switch"
filter :lldp => "topology_discovery", :packet_in => "routing_switch"

[Shell Script][Example] Files Copying Operation with Warning When the Same File Exists

Because someone asks me to do him a favor for a sample of of file copying operation, I just use bash shell to do so. Here is an example to use shell script to copy files from source path to destination path, which will give a warning message and skip copying if there is a file that exists.

#!/bin/bash SRC_DIR="/home/liudanny/scripts" # put your source directory DST_DIR="/home/liudanny/Downloads" # put your destination directory for src_full_name in "$SRC_DIR"/* # loop all the files in source directory do fname=$(echo ${src_full_name}|sed 's#^.*/##') # get the file name echo "name:$fname" dst_full_name=`printf "%s/%s" $DST_DIR $fname` # generate the destination file name echo "dst_full_name:$dst_full_name" if [ -e $dst_full_name ]; # check if destination file exists then echo "File: $fname exists..." else echo "Do copying $fname ..." cp $src_full_name $dst_full_name # if not exists, then copy file fi done

[ARP] How to look up arp table (mac/ip mapping) in Linux

First, we can ping hostname(ip_addr) to add mac/ip mapping into arp table
or use arp command to do so:
> arp -s hostname(ip_addr) MAC_addr

Second, look up arp table:
> arp -n   (I recommend to use "-n" for avoiding DNS lookup. It is faster.)
        Address                  HWtype    HWaddress               Flags Mask            Iface
        10.3.207.245             ether      20:aa:4b:a3:4c:b7            C                     eth4

or there is another way:
> ip ne
        10.3.207.245 dev eth4 lladdr 20:aa:4b:a3:4c:b7 REACHABLE

[OpenFlow] Update and Setup TP-LINK TL-WR1043ND for OpenFlow

Currently the version of TP-LINK TL-WR1043ND which I can get in Taiwan is "(TW) ver:1.0" instead of ver:1.8 I want. But, fortunately, after asking the vendor about this issue, he responds that there is no difference in hardware between "(TW) ver:1.0"and ver:1.8 or ver:1.4. That is a good news to me though. The following items are my steps to  transform original TP-LINK TL-WR1043ND to OpenFlow-enabled switch. Most of information is from http://www.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT

1. Update firmware on your device
Installing OpenWrt this web site has 4 methods for us to do updating. Because my TL-WR1043ND is brand new one, I choose the simplest of method 1: via orginal firmware.

• Download  image  (v1.8)
• Change your PC ip address to 192.168.1.2
• Connect to the switch with LAN port
• Browse http://192.168.1.1
• Choose function "update firmware" with the image bin file

2. Modify Configuration 

• Login  to 192.168.1.1 using telnet
• Setup your controller ip address (my controller ip is 192.168.1.244)
• vi  /etc/config/openflow

        config 'ofswitch'
                option 'dp' 'dp0'

                option 'dpid' '000000000011'

                option 'ofports' 'eth0.0 eth0.1 eth0.2 eth0.3 '
                option 'ofctl' 'tcp:192.168.1.244:6633'
                option 'mode'  'outofband'

• Setup your network configuration and setup this switch ip address (my switch ip is 192.168.1.11)
• vi /etc/config/network and paste the following lines

        config 'switch'
                option 'name' 'rtl8366rb'
                option 'reset' '1'
                option 'enable_vlan' '1'
                option 'enable_learning' '0'
               
        config 'switch_vlan'
                option 'device' 'rtl8366rb'
                option 'vlan' '1'
                option 'ports' '1 5t'
       
        config 'switch_vlan'
                option 'device' 'rtl8366rb'
                option 'vlan' '2'
                option 'ports' '2 5t'
       
        config 'switch_vlan'
                option 'device' 'rtl8366rb'
                option 'vlan' '3'
                option 'ports' '3 5t'
       
        config 'switch_vlan'
                option 'device' 'rtl8366rb'
                option 'vlan' '4'
                option 'ports' '4 5t'
       
        config 'switch_vlan'
                option 'device' 'rtl8366rb'
                option 'vlan' '5'
                option 'ports' '0 5t'
       
        config 'interface' 'loopback'
                option 'ifname' 'lo'
                option 'proto'  'static'
                option 'ipaddr' '127.0.0.1'
                option 'netmask' '255.0.0.0'
               
        config 'interface'
                option 'ifname' 'eth0.1'
                option 'proto' 'static'
       
        config 'interface'
                option 'ifname' 'eth0.2'
                option 'proto' 'static'
       
        config 'interface'
                option 'ifname' 'eth0.3'
                option 'proto' 'static'
       
        config 'interface'
                option 'ifname' 'eth0.4'
                option 'proto' 'static'
       
        config 'interface'
                option 'ifname' 'eth0.5'
                option 'proto' 'static'
                option 'ipaddr' '192.168.1.11'
                option 'netmask' '255.255.255.0' 

 3. Restart networking to enable your changes

• /etc/init.d/network restart

4. Verify (My case is for Trema Controller)

• Connect your Ethernet cable from LAN port to WAN port
• Start any kind of Trema app
• for instance : ./trema run ./objects/examples/learning_switch/learning_switch
• Show switch description
• TREMA_HOME=`pwd` ../apps/show_description/show_description
• And then we can get the information as follows:

        Manufacturer description: Stanford University
        Hardware description: Reference Userspace Switch
        Software description: 1.0.0
        Serial number: None
        Human readable description of datapath: OpenWrt pid=1933
        Datapath ID: 0x11
        Port no: 1(0x1)(Port up)
          Hardware address: 90:f6:52:89:c9:d0
          Port name: eth0.1
        Port no: 2(0x2)(Port up)
          Hardware address: 90:f6:52:89:c9:d0
          Port name: eth0.2
        Port no: 3(0x3)(Port up)
          Hardware address: 90:f6:52:89:c9:d0
          Port name: eth0.3
        Port no: 4(0x4)(Port up)
          Hardware address: 90:f6:52:89:c9:d0
          Port name: eth0.4